Alkycontrol Methanol Injection Generic kit for any boosted application.  This is a basic system.

Modified Pump 250+ PSI on M15 and water. Pump is specially modified to resist straight methanol alcohol and the case has been sealed to prevent water intrusion.

Progressive controller specifically made MAP based systems. Features pressure sensing as the fail safe. There is an included LED that changes colors letting the driver know system not only has activated but has made pressure. Filter included assures no clogged nozzle.

4- Pre-taped pump fittings

90 micron in-line filter

3 sections of braided hoses are included. 24 inch -6 with ends, a 12 inch -4 and a 26 inch -4.

M15  15 GPH Nozzle

3qt Tank with 90 degree elbow, low level float sender, and teathered breather cap.

All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.

This is our version of a generic kit. If you need a vehicle specific kit, please contact us. Instructions, tip sheets, and tech support is included. 100's of this particular kit have been sold.

Will support 650 RWHP on a single nozzle using pump gas, twin nozzle upgrades are available for faster cars.  Kit is designed to run on straight methanol or any water mix thereof. This same kit has help power a twin turbo Fox mod motored Mustang to 8.44 at 162. 

Requires an existing 2 bar, 3 bar, or greater MAP sensor. If you need a MAP sensor, contact us for assistance.

This kit is for custom vehicles that are different in the way their underhood setups are located. Will need hoses and a reservoir. We can assist with that if needed.